PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 433502C1
433502C1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include length: 2.250 INCHES NOMINAL IN, material: STEEL, slot_width: 0.281 INCHES NOMINAL IN, body_radius: 3.250 INCHES NOMINAL IN, slot_length: 0.650 INCHES NOMINAL IN, corner_radius: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-837-8482, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
433502C1
NSN: 5340-00-837-8482
FSC: 5340
CAGE: 92679 — NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ (USA)
SPECIFICATIONS
length2.250 INCHES NOMINAL IN
materialSTEEL
slot_width0.281 INCHES NOMINAL IN
body_radius3.250 INCHES NOMINAL IN
slot_length0.650 INCHES NOMINAL IN
corner_radius0.375 INCHES NOMINAL IN
body_thickness0.070 INCHES NOMINAL IN
special_featuresSECOND HOLE DESIGNED FOR ANCHOR PIN
securing_device_typeTHREADED FASTENER
peripheral_shape_styleIRREGULAR, TWO HOLES
cross-sectional_shape_styleFLAT
mounting_opening_shape_styleCLOSED HORIZONTAL SLOT
NSN5340-00-837-8482
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 433502C1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: IRREGULAR, TWO HOLES
•
MATERIAL: STEEL
•
SLOT WIDTH: 0.281 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
BODY THICKNESS: 0.070 INCHES NOMINAL IN
•
SECURING DEVICE TYPE: THREADED FASTENER
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 4.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL SHAPE STYLEIRREGULAR, TWO HOLES
SPECIAL FEATURESSECOND HOLE DESIGNED FOR ANCHOR PIN
MATERIALSTEEL
SLOT WIDTH0.281 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
BODY THICKNESS0.070 INCHES NOMINAL IN
SECURING DEVICE TYPETHREADED FASTENER
DISTANCE BETWEEN HOLES ALONG LENGTH4.000 INCHES NOMINAL IN
CORNER RADIUS0.375 INCHES NOMINAL IN
SLOT LENGTH0.650 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
918 22Interchangeable
interchangeable cross-reference
interchangeable
2012-T 22Interchangeable
interchangeable cross-reference
interchangeable
1340Interchangeable
interchangeable cross-reference
interchangeable
150 VInterchangeable
interchangeable cross-reference
interchangeable
5133PL1398604Interchangeable
interchangeable cross-reference
interchangeable
15022Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 433502C1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 433502C1?
433502C1 is a COVER,ACCESS.
What parts can replace 433502C1?
There are 20 known substitutes for 433502C1: 918 22, 2012-T 22, 1340 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 433502C1?
433502C1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-837-8482. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 433502C1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026