PartsTable
Technical Data Sheet
Download PDF

43320-32 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

43320-32: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include overall_width: 2.370 INCHES NOMINAL IN, overall_height: 1.550 INCHES NOMINAL IN, overall_length: 4.640 INCHES NOMINAL IN, operation_method: LEVER, style_designator: LEVER, engaging_surface_width: 1.060 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-330-8547, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
43320-32
NSN: 5340-01-330-8547
FSC: 5340 — Hardware, Commercial
CAGE: 31272 — ANCRA INTERNATIONAL LLC (USA)
SPECIFICATIONS
overall_width2.370 INCHES NOMINAL IN
overall_height1.550 INCHES NOMINAL IN
overall_length4.640 INCHES NOMINAL IN
operation_methodLEVER
style_designatorLEVER
engaging_surface_width1.060 INCHES NOMINAL IN
NSN5340-01-330-8547
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 43320-32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ENGAGING SURFACE WIDTH: 1.060 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVER
•
OPERATION METHOD: LEVER
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.550 INCHES NOMINAL IN
ENGAGING SURFACE WIDTH1.060 INCHES NOMINAL IN
STYLE DESIGNATORLEVER
OVERALL LENGTH4.640 INCHES NOMINAL IN
OVERALL WIDTH2.370 INCHES NOMINAL IN
OPERATION METHODLEVER
SUBSTITUTES & CROSS-REFERENCES 2
43320-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
43320-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 43320-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 43320-32?
43320-32 is a CATCH,CLAMPING.
What parts can replace 43320-32?
There are 2 known substitutes for 43320-32: 43320-13, 43320-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 43320-32?
43320-32 is cataloged in the U.S. Government catalog under NSN 5340-01-330-8547. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 43320-32