43253: SUPPORT,STRUCTURAL COMPONENT,AIR.
Converts a USB Type C port to a VGA port Supports VGA resolutions up to 1920x1200@60Hz Requires DisplayPort Alternate Mode support by the USB Port/Bus Plug & Play, no drivers required 2 Year Warranty This Lindy USB Type C to VGA Adapter Cable allows users to easily add external video capabilities to a computer featuring the USB Type C port with additional support for DisplayPort Alternate Mode. The VGA connector of the adapter cable can be directly connected to the VGA monitor - while the 3m cable allows for a more flexible positioning of the VGA monitor than when using a box converter - perfect for a simple and adaptable installation. With support for a resolution of 1920x1200@60Hz, content can be viewed with clarity and accuracy, while the Type C connector' s reversible design was developed to find a connection regardless of which way the cable is inserted into the port.
The USB Type C to VGA Adapter Cable is powered by the USB Bus, therefore no exter This part is cataloged in the U.S. Government catalog under NSN 9540-00-422-1737, indicating validated use in U.S. government and defense logistics supply chains.
| material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR FLOAT |
| current_type | DC |
| terminal_type | STUD |
| overall_length | 31.250 INCHES MINIMUM IN |
| voltage_rating | 10.0 VOLTS MINIMUM AND 12.0 VOLTS MAXIMUM |
| mounting_method | BRACKET(S) |
| pressure_rating | 0.000 POUNDS PER SQUARE INCH (PSI) MINIMUM AND 400.000 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS |
| actuation_method | FLOAT |
| special_features | USED ON F112 ENGINE |
| terminal_quantity | 3 |
| resistance_in_ohms | 5.100 PER INCH OF INDICATION |
| float_effective_travel | 17.000 INCHES NOMINAL IN |
| NSN | 9540-00-422-1737 |
| OVERALL HEIGHT | 2.000 INCHES NOMINAL IN |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.062 INCHES NOMINAL IN |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.000 INCHES NOMINAL IN |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| HEAT TREATMENT | T-6511 SOLUTION HEAT TREATED |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.062 INCHES NOMINAL IN |
| FIRST TIP RADIUS | 0.032 INCHES NOMINAL IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE |