The Pump Unit,centrifugal, cataloged under National Stock Number 4320-00-689-3192, is classified within Federal Supply Class 4320 (No Item Name Available) of the Pumps and Compressors group. The primary manufacturer of record is Itt Bell and Gosset-Hydronics a Unit of Itt Fluid Handling Div. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4320-00-689-3192 |
| Primary Part Number | 60-2S |
| Item Name | Pump Unit,centrifugal |
| FSC / FSG | 4320 / 43 — No Item Name Available |
| Manufacturer | Itt Bell and Gosset-Hydronics a Unit of Itt Fluid Handling Div |
| Status | ACTIVE |
| Prime Mover Quantity | 1 |
| Inclosure Type | OPEN |
| Unpackaged Unit Height | 11.000 INCHES NOMINAL IN |
| Centrifugal Pump Impeller Quantity | 1 |
| Suction Lift | 15.000 FEET FT |
| Discharge Connection Thread Size and Series/type Designator | 1.250-11-1/2 NPT |
| Centrifugal Pump Design | RADIAL FLOW |
| Centrifugal Pump Impeller Suction Type | SINGLE |
| Operating Speed at Rated Capacity | 1750.0 REVOLUTIONS PER MINUTE |
| Current Rating in Amps | 1.6 AND 0.8 |
| Total Head | 26.000 FEET FT |
| Prime Mover Type | ELECTRIC MOTOR |
| Maximum Discharge Flow Rate | 47.0 GALLONS PER MINUTE |
| Discharge Pressure | 75.0 COMPREHENSIVE PROCUREMENT GUIDELINE - CONSTRUCTION PRODUCTS - CEMENT AND CONCRETE CONTAINING CENOSPHERES |
| Unpackaged Unit Width | 7.5000 INCHES NOMINAL IN |
| Unpackaged Unit Length | 19.250 INCHES NOMINAL IN |
| Intake Connection Thread Size and Series/type Designator | 1.250-11-1/2 NPT |
| Phase | SINGLE |
| Voltage in Volts | 115.0 AND 230.0 |
| Frequency in Hertz | 60.0 |
| Prime Mover Power Rating | 0.250 HORSEPOWER |
| Cooling Method | SELF VENTILATED |
| Media for Which Designed | WATER, FRESH |
| Intake Connection Quantity | 1 |
| Mounting Type | BASE |
| Pump Quantity | 1 |
| Current Type | AC |
| Prime Mover Cooling Medium | AIR |
| Intake Connection Type | THREADED INTERNAL |
| Environmental Protection | DRIPPROOF |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 60-2S | Itt Bell and Gosset-Hydronics a Unit of Itt Fluid Handling Div (USA) |
| SERIES 60 1 1/4AA 5 1/4 1/3HP | Itt Bell and Gosset-Hydronics a Unit of Itt Fluid Handling Div (USA) |
NSN 4320-00-689-3192 is a Pump Unit,centrifugal, manufactured by Itt Bell and Gosset-Hydronics a Unit of Itt Fluid Handling Div, classified under FSC 4320 (No Item Name Available). Status: active.
NSN 4320-00-689-3192 has 2 cross-referenced part numbers: 60-2S (Itt Bell and Gosset-Hydronics a Unit of Itt Fluid Handling Div), SERIES 60 1 1/4AA 5 1/4 1/3HP (Itt Bell and Gosset-Hydronics a Unit of Itt Fluid Handling Div).
There is 1 known substitute for 4320-00-689-3192: 6685-00-251-1360. Verify interchangeability with system specifications before substitution.
Key specifications for 60-2S: Prime Mover Quantity: 1; Inclosure Type: OPEN; Unpackaged Unit Height: 11.000 INCHES NOMINAL IN; Centrifugal Pump Impeller Quantity: 1. 30 total characteristics are documented in the Federal Logistics Information System.