PartsTable TECHNICAL DATA SHEET
NSN 4320-00-075-1951Government record, cited

Ring, Wearing4320-00-075-1951

NSN 4320-00-075-1951 · NIIN 000751951 · Part number H4320-075-1951
Naval Inventory Control Point Mechanicsburg · FSC 4320 — Power and Hand Pumps · FSG 43 — Pumps and Compressors · CAGE 03950
Government record, cited
NSN 4320-00-075-1951 — this item is cataloged by the U.S. Government under National Stock Number 4320-00-075-1951. Manufacturer of record part number: H4320-075-1951.
Also searched as  4320-00-075-1951 · 4320000751951 · NIIN 000751951 · 00-075-1951 · FSC 4320 Power and Hand Pumps · CAGE 03950 · H4320-075-1951 · A-2 1/2NC180B-1 · A2 1-2NC180A1US305
Nearby stock numbers  ·
Features
  • Ring,wearing — FSC 4320
  • Center Flange Thickness: 0.242 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
  • Surface Finish: 125.0 MICROINCHES ALL SURFACES
  • Corner Shape: SQUARE INSIDE RIGHT CORNER
  • Corner Shape: SQUARE INSIDE LEFT CORNER
  • Corner Shape: CHAMFERED OUTSIDE LEFT CORNER
  • Corner Shape: CHAMFERED OUTSIDE RIGHT CORNER
  • Chamfer Length: 0.031 INCHES NOMINAL OUTSIDE LEFT CORNER IN
Identification
  • NSN: 4320-00-075-1951
  • NIIN: 000751951
  • FSC: 4320 — Power and Hand Pumps
  • FSG: 43 — Pumps and Compressors
  • Primary part number: H4320-075-1951
  • Manufacturer: Naval Inventory Control Point Mechanicsburg
General Description

The Ring,wearing, cataloged under National Stock Number 4320-00-075-1951, is classified within Federal Supply Class 4320 (Power and Hand Pumps) of the Pumps and Compressors group. The manufacturer of record is Naval Inventory Control Point Mechanicsburg. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN4320-00-075-1951
Primary Part NumberH4320-075-1951
Item NameRing,wearing
FSC / FSG4320 / 43 — Power and Hand Pumps
ManufacturerNaval Inventory Control Point Mechanicsburg
StatusACTIVE
Center Flange Thickness0.242 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
Surface Finish125.0 MICROINCHES ALL SURFACES
Corner ShapeSQUARE INSIDE RIGHT CORNER
Corner ShapeSQUARE INSIDE LEFT CORNER
Corner ShapeCHAMFERED OUTSIDE LEFT CORNER
Corner ShapeCHAMFERED OUTSIDE RIGHT CORNER
Chamfer Length0.031 INCHES NOMINAL OUTSIDE LEFT CORNER IN
Chamfer Length0.031 INCHES NOMINAL OUTSIDE RIGHT CORNER IN
Body StyleEXTERNAL LOCKING FLANGE
Body Outside Diameter4.999 INCHES NOMINAL IN
End to Flange Distance0.312 INCHES NOMINAL IN
Groove Depth0.051 INCHES NOMINAL IN
Distance Below Centerline0.094 INCHES NOMINAL IN
Body Inside Diameter4.684 INCHES NOMINAL IN
Smallest External Anchor Flange Radius2.438 INCHES NOMINAL IN
Chamfer Angle45.0 DEGREES NOMINAL OUTSIDE RIGHT CORNER
Chamfer Angle45.0 DEGREES NOMINAL OUTSIDE LEFT CORNER
MaterialSTEEL
Largest External Anchor Flange Radius2.625 INCHES NOMINAL IN
Groove Width0.085 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
H4320-075-1951 PRIMARY Naval Inventory Control Point Mechanicsburg (USA)
Reference documents
ReferenceMeaning
A-2 1/2NC180B-1 C/1 Advisory reference — outside the item-of-supply concept
Carver Pump Company
A2 1-2NC180A1US305 5/9 Secondary reference
Carver Pump Company
No interchangeability data on file.
Other items in FSC 4320 — Power and Hand Pumps
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4320-00-001-1633
4320-00-001-1633 · Item name not on file
4320-00-001-2628
RETAINER AND PIN
4320-00-001-2629
HOUSING AND PIN
4320-00-001-2630
PUMP,CENTRIFUGAL
4320-00-001-2631
4320-00-001-2631 · Item name not on file
4320-00-001-2632
4320-00-001-2632 · Item name not on file
4320-00-001-3377
4320-00-001-3377 · Item name not on file
4320-00-001-3384
4320-00-001-3384 · Item name not on file

Frequently Asked Questions

What is NSN 4320-00-075-1951?

NSN 4320-00-075-1951 is a Ring,wearing, manufactured by Naval Inventory Control Point Mechanicsburg, classified under FSC 4320, Power and Hand Pumps. Status: active.

What part numbers are listed for NSN 4320-00-075-1951?

NSN 4320-00-075-1951 has 1 manufacturer part number on file: H4320-075-1951 (Naval Inventory Control Point Mechanicsburg).

What are the specifications of H4320-075-1951?

Key specifications for H4320-075-1951: Center Flange Thickness: 0.242 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN; Surface Finish: 125.0 MICROINCHES ALL SURFACES; Corner Shape: SQUARE INSIDE RIGHT CORNER; Corner Shape: SQUARE INSIDE LEFT CORNER. 20 specifications are documented in the U.S. Government catalog.

Is NSN 4320-00-075-1951 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com