PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4317L
4317L ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, cross-sectional_thickness: 0.063 INCHES NOMINAL IN, cross-sectional_shape_style: METAL AND METALLIC MATERIALS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-173-2358, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4317L
NSN: 5330-00-173-2358
FSC: 5330
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
hole_diameter0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
cross-sectional_thickness0.063 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND METALLIC MATERIALS
NSN5330-00-173-2358
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4317L MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.063 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND METALLIC MATERIALS
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.063 INCHES NOMINAL IN
HOLE DIAMETER0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND METALLIC MATERIALS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
27511Interchangeable
interchangeable cross-reference
interchangeable
27511-JInterchangeable
interchangeable cross-reference
interchangeable
4317Interchangeable
IBM 8.5GB 10k Disk Scsi-U2 80p 3.5in
interchangeable
Y4307Interchangeable
interchangeable cross-reference
interchangeable
MPM117Interchangeable
interchangeable cross-reference
interchangeable
609126Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4317L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4317L?
4317L is a GASKET.
What parts can replace 4317L?
There are 18 known substitutes for 4317L: 27511, 27511-J, 4317 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4317L?
4317L is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-173-2358. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4317L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026