PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4316M
4316M ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,CURRENT REGULATING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, overall_height: 0.7500 INCHES NOMINAL IN, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, bore_smallest_diameter: 2.0000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1759, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4316M
NSN: 3110-00-156-1759
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
overall_height0.7500 INCHES NOMINAL IN
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter2.0000 INCHES NOMINAL IN
overall_outside_diameter2.9375 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
thrust_directional_capability_designationSINGLE
NSN3110-00-156-1759
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 4316M · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 2.9375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: GROUND
•
BORE SMALLEST DIAMETER: 2.0000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER2.9375 INCHES NOMINAL IN
STYLE DESIGNATORGROOVED RACE SURFACE
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
ALIGNMENT TYPERIGID
SURFACE FINISHGROUND
OVERALL HEIGHT0.7500 INCHES NOMINAL IN
BORE SMALLEST DIAMETER2.0000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
39Interchangeable
interchangeable cross-reference
interchangeable
B5301Interchangeable
interchangeable cross-reference
interchangeable
13B4B1000041A14S00000Interchangeable
interchangeable cross-reference
interchangeable
A52491-70Interchangeable
interchangeable cross-reference
interchangeable
A-A-52491Interchangeable
interchangeable cross-reference
interchangeable
4316Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4316M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4316M?
4316M is a RESISTOR,CURRENT REGULATING.
What parts can replace 4316M?
There are 24 known substitutes for 4316M: 39, B5301, 13B4B1000041A14S00000 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4316M?
4316M is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1759. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4316M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026