PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 431433
431433 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include end_item_identification: GEAR REDUCTION MAIN PORT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-221-6333, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
431433
NSN: 5315-00-221-6333
FSC: 5315
CAGE: 95683 — GENERAL STORES SUPPLY OFFICE (USA)
SPECIFICATIONS
end_item_identificationGEAR REDUCTION MAIN PORT
NSN5315-00-221-6333
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 431433 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK LENGTH: 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
•
EYE INSIDE DIAMETER: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
COLLAR OUTSIDE DIAMETER: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
•
EYE STOCK THICKNESS: 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
SHANK DIAMETER: 0.234 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC SHANK
•
MATERIAL: COPPER ALLOY 464 OR STEEL COMP 1022 OR STEEL COMP 8620 OVERALL
•
STYLE DESIGNATOR: EYE COLLAR
TECHNICAL CHARACTERISTICS (FLIS)
SHANK LENGTH0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
EYE INSIDE DIAMETER0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
COLLAR OUTSIDE DIAMETER0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
EYE STOCK THICKNESS0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
SHANK DIAMETER0.234 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
SURFACE TREATMENTZINC SHANK
MATERIALCOPPER ALLOY 464 OR STEEL COMP 1022 OR STEEL COMP 8620 OVERALL
STYLE DESIGNATOREYE COLLAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
43-8Interchangeable
interchangeable cross-reference
interchangeable
5315-7-2B2-00Interchangeable
interchangeable cross-reference
interchangeable
5315-7-2B1-50Interchangeable
interchangeable cross-reference
interchangeable
5315-7-3A3-00Interchangeable
interchangeable cross-reference
interchangeable
PURCHASEDET43-8Interchangeable
interchangeable cross-reference
interchangeable
167H476Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 431433?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 431433?
431433 is a BEARING,BALL,ANNULAR.
What parts can replace 431433?
There are 8 known substitutes for 431433: 43-8, 5315-7-2B2-00, 5315-7-2B1-50 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 431433?
431433 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-221-6333. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 431433

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026