PartsTable
Technical Data Sheet
Download PDF

431384 ITEM 12 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

431384 ITEM 12: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 1.736 INCHES NOMINAL IN, center_hole_diameter: 1.563 INCHES MINIMUM AND 1.565 INCHES MAXIMUM IN, cross-sectional_height: 0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-421-2024, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
431384 ITEM 12
NSN: 5330-01-421-2024
FSC: 5330 — Packing and Gasket Materials
CAGE: 13520 — DONALDSON COMPANY, INC. (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter1.736 INCHES NOMINAL IN
center_hole_diameter1.563 INCHES MINIMUM AND 1.565 INCHES MAXIMUM IN
cross-sectional_height0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationMIL-R-8791/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-421-2024
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 431384 ITEM 12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
PERIPHERAL DIAMETER: 1.736 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.563 INCHES MINIMUM AND 1.565 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
PERIPHERAL DIAMETER1.736 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.563 INCHES MINIMUM AND 1.565 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
5330PL2129822Reference document
Same NSN cross-reference
Reference document — Informative reference only
M8791/1-129Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS8791/1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 431384 ITEM 12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 431384 ITEM 12?
431384 ITEM 12 is a RETAINER,PACKING.
What parts can replace 431384 ITEM 12?
There are 3 known substitutes for 431384 ITEM 12: 5330PL2129822, M8791/1-129, SAE-AS8791/1. Substitute compatibility should be verified for your specific system.
What is the NSN for 431384 ITEM 12?
431384 ITEM 12 is cataloged in the U.S. Government catalog under NSN 5330-01-421-2024. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 431384 ITEM 12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.