PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 431055001
431055001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, construction: ONE-PIECE, outside_diameter: 0.865 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN, retainer_thickness: 0.200 INCHES NOMINAL IN, packing_inside_diameter: 0.500 INCHES NOMINAL IN, packing_ring_cross-sectional_diameter: 0.315 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-021-2469, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
431055001
NSN: 5330-01-021-2469
FSC: 5330
CAGE: 29731 — GARDNER DENVER WATER JETTING SYSTEMS, INC. DIV ENGINEERED PACKAGE GROUP (USA)
SPECIFICATIONS
materialSTEEL RETAINER
constructionONE-PIECE
outside_diameter0.865 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
retainer_thickness0.200 INCHES NOMINAL IN
packing_inside_diameter0.500 INCHES NOMINAL IN
packing_ring_cross-sectional_diameter0.315 INCHES NOMINAL IN
NSN5330-01-021-2469
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 431055001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL RETAINER
•
RETAINER THICKNESS: 0.200 INCHES NOMINAL IN
•
CONSTRUCTION: ONE-PIECE
•
PACKING INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.865 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.315 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL RETAINER
RETAINER THICKNESS0.200 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
PACKING INSIDE DIAMETER0.500 INCHES NOMINAL IN
OUTSIDE DIAMETER0.865 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
PACKING RING CROSS-SECTIONAL DIAMETER0.315 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
50698Interchangeable
interchangeable cross-reference
interchangeable
783600-1Interchangeable
interchangeable cross-reference
interchangeable
320-6204-455367PCCInterchangeable
interchangeable cross-reference
interchangeable
DE29253PCCInterchangeable
interchangeable cross-reference
interchangeable
212-62-1237PCALLInterchangeable
interchangeable cross-reference
interchangeable
31055Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 431055001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 431055001?
431055001 is a PACKING WITH RETAINER.
What parts can replace 431055001?
There are 20 known substitutes for 431055001: 50698, 783600-1, 320-6204-455367PCC and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 431055001?
431055001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-021-2469. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 431055001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026