PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4304070-8
4304070-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.250 INCHES NOMINAL IN, aperture_width: 1.500 INCHES NOMINAL IN, overall_length: 3.625 INCHES NOMINAL IN, aperture_length: 2.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-361-4732, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4304070-8
NSN: 5330-00-361-4732
FSC: 5330
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.250 INCHES NOMINAL IN
aperture_width1.500 INCHES NOMINAL IN
overall_length3.625 INCHES NOMINAL IN
aperture_length2.625 INCHES NOMINAL IN
outside_corner_radius0.375 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,+3313B MIL SPEC ALL MATERIAL RESPONSES OR MIL-G-12803,+3313C MIL SPEC ALL MATERIAL RESPONSES OVERALL
center_to_center_distance_between_bolt_holes_along_width1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-361-4732
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4304070-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE WIDTH: 1.500 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.375 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+3313B MIL SPEC ALL MATERIAL RESPONSES OR MIL-G-12803,+3313C MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
APERTURE LENGTH: 2.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE WIDTH1.500 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+3313B MIL SPEC ALL MATERIAL RESPONSES OR MIL-G-12803,+3313C MIL SPEC ALL MATERIAL RESPONSES OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
APERTURE LENGTH2.625 INCHES NOMINAL IN
OVERALL LENGTH3.625 INCHES NOMINAL IN
OVERALL WIDTH2.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
24816Interchangeable
interchangeable cross-reference
interchangeable
10-855Interchangeable
interchangeable cross-reference
interchangeable
585196-1Interchangeable
interchangeable cross-reference
interchangeable
QTX32046Interchangeable
interchangeable cross-reference
interchangeable
32-046Interchangeable
interchangeable cross-reference
interchangeable
119-1617Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4304070-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4304070-8?
4304070-8 is a GASKET.
What parts can replace 4304070-8?
There are 11 known substitutes for 4304070-8: 24816, 10-855, 585196-1 and 8 more. Substitute compatibility should be verified for your specific system.
Is 4304070-8 still available?
4304070-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4304070-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026