PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 430-74909-5
430-74909-5 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 45.0 MILLIMETERS NOMINAL MM, overall_width: 25.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, locating_feature: NONLOCATING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7319, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
430-74909-5
NSN: 3110-00-155-7319
FSC: 3110
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter45.0 MILLIMETERS NOMINAL MM
overall_width25.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
locating_featureNONLOCATING
style_designatorSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING WITH TWO ROLLER RETAINMENT RINGS ON OUTER, NON-SEPARABLE
overall_outside_diameter85.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationRBEC NO.1
NSN3110-00-155-7319
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 430-74909-5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
•
LOCATING FEATURE: NONLOCATING
•
MATERIAL: STEEL OUTER RING
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING WITH TWO ROLLER RETAINMENT RINGS ON OUTER, NON-SEPARABLE
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
LOCATING FEATURENONLOCATING
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
MATERIALSTEEL ROLLER
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING WITH TWO ROLLER RETAINMENT RINGS ON OUTER, NON-SEPARABLE
SURFACE FINISHGROUND
OVERALL WIDTH19.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER85.0 MILLIMETERS NOMINAL MM
BORE DIAMETER45.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
434054Interchangeable
interchangeable cross-reference
interchangeable
62FT1Interchangeable
interchangeable cross-reference
interchangeable
230384Interchangeable
interchangeable cross-reference
interchangeable
B5154Interchangeable
interchangeable cross-reference
interchangeable
SCC27213Interchangeable
interchangeable cross-reference
interchangeable
3E6512Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 430-74909-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 430-74909-5?
430-74909-5 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace 430-74909-5?
There are 18 known substitutes for 430-74909-5: 434054, 62FT1, 230384 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 430-74909-5?
430-74909-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7319. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 430-74909-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026