PartsTable
Technical Data Sheet
PartsTable / MRO / 43-90075
43-90075 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The 43-90075 is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, minor_width: 0.120 INCHES NOMINAL IN, minor_height: 0.120 INCHES NOMINAL IN, end_cut_angle: 45.0 DEGREES, hole_diameter: 0.250 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-497-5862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 43-90075
NSN: 5999-00-497-5862
FSC: 5999
CAGE: 07700 — TECHNICAL WIRE PRODUCTS, LLC DBA TWP (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
minor_width0.120 INCHES NOMINAL IN
minor_height0.120 INCHES NOMINAL IN
end_cut_angle45.0 DEGREES
hole_diameter0.250 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
overall_length21.190 INCHES NOMINAL IN
special_featuresADHESIVE BACKING ALONG ONE SIDE
style_designatorRECTANGULAR
precious_materialSILVER
surface_treatmentUNABLE TO DECODE
bolt_hole_quantity6
NSN5999-00-497-5862
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 43-90075 MFR 43-90075
KEY FEATURES
•
END CUT ANGLE: 45.0 DEGREES
•
HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
MINOR WIDTH: 0.120 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.120 INCHES NOMINAL IN
•
PRECIOUS MATERIAL: SILVER
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.410 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.750 INCHES NOMINAL IN
END CUT ANGLE45.0 DEGREES
HOLE DIAMETER0.250 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
MINOR WIDTH0.120 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.120 INCHES NOMINAL IN
PRECIOUS MATERIALSILVER
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.410 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.312 INCHES NOMINAL IN
PRECIOUS MATERIAL AND LOCATIONEMI/RFI CONDUCTIVE PARTICLES SILVER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
43-90075Interchangeable
interchangeable cross-reference
interchangeable
134304-12Interchangeable
interchangeable cross-reference
interchangeable
134304-13Interchangeable
interchangeable cross-reference
interchangeable
134304-14Interchangeable
interchangeable cross-reference
interchangeable
134304-15Interchangeable
interchangeable cross-reference
interchangeable
134304-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 43-90075?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 43-90075?
43-90075 is a 43-90075. It is classified as a MRO (MRO_GENERAL).
What parts can replace 43-90075?
There are 13 known substitutes for 43-90075: 43-90075, 134304-12, 134304-13 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 43-90075?
43-90075 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-497-5862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 43-90075

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026