PartsTable
Technical Data Sheet
43-125 ✓ Verified by PartsTable
InLine · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The InLine laser distance meter allows the easy and convenient measuring of distances up to 40m, including calculation of areas, volumes and heights.<br><br>- Measuring range: approx. 0.05 to 40m.<br>- Simple distance measurement and calculation function of area, volume, height (above the Pythagorean theorem), and addition and subtraction of area.<br>- Storage and retrieval of the last 50 measurement results.<br>- Display in metric and british unit system.<br>- Display: LCD with backlight.<br>- Automatic shutdown.<br>- Measurement accuracy typically (md standard deviation): ± 2mm.<br>- Measuring range: 0.05 - 40m.<br>- Laser Type: Wavelength 620- 690nm, < 1mW, class 2.<br>- Measurements per battery set: up to 8000.<br>- Distance unit: Meter, inches, feet.<br>- Operating temperature: 0 to +40°C.<br>- Storage temperature: -20 to +65°C.<br>- Display of minimum and maximum values.<br>- Continuous measurement possible.<br>- Splash / dust -proof: IP40.<br>- Batteries: 2x AAA, 1.5V, not inclu This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4357, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 43-125
NSN: 3110-00-142-4357
FSC: 3110
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
body_styleCYLINDRICAL BUSHING MOUNTED
cone_width0.9478 INCHES NOMINAL IN
body_length0.562 INCHES NOMINAL IN
flat_height0.216 INCHES NOMINAL IN
shaft_styleROUND, FLATTED
lug_quantity6
shaft_length0.688 INCHES NOMINAL IN
thread_class2B
actuator_typeSINGLE SHAFT
body_diameter1.125 INCHES NOMINAL IN
bore_diameter1.2500 INCHES NOMINAL IN
NSN3110-00-142-4357
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 43-125 · InLine ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL OVERALL
STYLE DESIGNATOR: STEEP ANGLE
CONE WIDTH: 0.9478 INCHES NOMINAL IN
CONE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
STYLE DESIGNATORSTEEP ANGLE
CONE WIDTH0.9478 INCHES NOMINAL IN
CONE CORNER RADIUS0.0625 INCHES NOMINAL IN
BORE DIAMETER1.2500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
604688Interchangeable
interchangeable cross-reference
interchangeable
CP10167Interchangeable
interchangeable cross-reference
interchangeable
43125Interchangeable
interchangeable cross-reference
interchangeable
B465Interchangeable
interchangeable cross-reference
interchangeable
YAV14L65Interchangeable
interchangeable cross-reference
interchangeable
S7-13Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 43-125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 43-125?
43-125 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by InLine. It is classified as a MRO (MRO_GENERAL).
What parts can replace 43-125?
There are 20 known substitutes for 43-125: 604688, CP10167, 43125 and 17 more. Substitute compatibility should be verified for your specific system.
Is 43-125 still available?
43-125 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 43-125