PartsTable
Technical Data Sheet
PartsTable / O-RING / 429559PC12
429559PC12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.254 INCHES NOMINAL IN, center_hole_diameter: 1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN, cross-sectional_height: 0.062 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-223-2880, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
429559PC12
NSN: 5331-00-223-2880
FSC: 5331 — O-RING
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.254 INCHES NOMINAL IN
center_hole_diameter1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
cross-sectional_height0.062 INCHES NOMINAL IN
NSN5331-00-223-2880
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 429559PC12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.254 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
OUTSIDE DIAMETER1.254 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
100-7/16Interchangeable
interchangeable cross-reference
interchangeable
ZHVY0351-4Interchangeable
interchangeable cross-reference
interchangeable
11024Interchangeable
interchangeable cross-reference
interchangeable
5950PL0916707Interchangeable
interchangeable cross-reference
interchangeable
N2539P15Interchangeable
interchangeable cross-reference
interchangeable
3535B6A0400A110A4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 429559PC12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 429559PC12?
429559PC12 is a O-RING.
What parts can replace 429559PC12?
There are 24 known substitutes for 429559PC12: 100-7/16, ZHVY0351-4, 11024 and 21 more. Substitute compatibility should be verified for your specific system.
Is 429559PC12 still available?
429559PC12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 429559PC12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026