PartsTable
Technical Data Sheet
Download PDF

42875 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

42875: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, body_width: 1.750 INCHES MAXIMUM IN, body_height: 1.750 INCHES MAXIMUM IN, body_length: 1.000 INCHES MAXIMUM IN, overall_width: 1.1875 INCHES NOMINAL IN, rating_method: ELECTRICAL SINGLE COMPONENT SINGLE WINDING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0336, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
42875
NSN: 3110-00-100-0336
NIINs: 001000336, 011859423
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width1.750 INCHES MAXIMUM IN
body_height1.750 INCHES MAXIMUM IN
body_length1.000 INCHES MAXIMUM IN
overall_width1.1875 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
inclosure_typeFULLY INCLOSED
inductance_typeFIXED
mounting_methodTHREADED STUD(S) SINGLE GROUP
frequency_rating20.0 KILOHERTZ MINIMUM SINGLE COMPONENT
outside_diameter6.6250 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
NSN3110-00-100-0336
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 42875 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 6.6250 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 58536-A-A-59649-122 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH1.1875 INCHES NOMINAL IN
OUTSIDE DIAMETER6.6250 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA58536-A-A-59649-122 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
672Reference document
Same NSN cross-reference
Reference document — Secondary reference
106701Reference document
Same NSN cross-reference
Reference document — Secondary reference
V1629Reference document
Same NSN cross-reference
Reference document — Secondary reference
E050568Reference document
Same NSN cross-reference
Reference document — Secondary reference
672004Reference document
Same NSN cross-reference
Reference document — Secondary reference
K672Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 42875?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42875?
42875 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 42875?
There are 7 known substitutes for 42875: 672, 106701, V1629 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 42875?
42875 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0336. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42875

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.