PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4285-7
4285-7 ✓ Verified by PartsTable
Lindy · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The OSCILLATOR,CRYSTAL CONTROLLED is a Lindy industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.125 INCHES NOMINAL IN, hole_diameter: 0.812 INCHES NOMINAL IN, overall_diameter: 1.500 INCHES NOMINAL IN, special_test_features: SPECIAL QUALITY CONTROL TESTING, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-003-6688, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4285-7
NSN: 5310-00-003-6688
FSC: 5310
CAGE: 42375 — NATIONAL ANNEALING BOX CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.125 INCHES NOMINAL IN
hole_diameter0.812 INCHES NOMINAL IN
overall_diameter1.500 INCHES NOMINAL IN
special_test_featuresSPECIAL QUALITY CONTROL TESTING
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
reference_number_differentiating_characteristicsMATERIAL MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
NSN5310-00-003-6688
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4285-7 · Lindy ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
OVERALL DIAMETER: 1.500 INCHES NOMINAL IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.812 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMATERIAL MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
TEST DATA DOCUMENT81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
OVERALL DIAMETER1.500 INCHES NOMINAL IN
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.812 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
9D77312Interchangeable
interchangeable cross-reference
interchangeable
312MFFInterchangeable
interchangeable cross-reference
interchangeable
FF-B-171Interchangeable
interchangeable cross-reference
interchangeable
42-857Interchangeable
interchangeable cross-reference
interchangeable
046349Interchangeable
interchangeable cross-reference
interchangeable
042857Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4285-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4285-7?
4285-7 is a OSCILLATOR,CRYSTAL CONTROLLED manufactured by Lindy.
What parts can replace 4285-7?
There are 8 known substitutes for 4285-7: 9D77312, 312MFF, FF-B-171 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4285-7?
4285-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-003-6688. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4285-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026