PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 428095
428095 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.0594 INCHES NOMINAL IN, bore_diameter: 2.0000 INCHES NOMINAL IN, style_designator: STEEP ANGLE, cone_corner_radius: 0.1406 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3629, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
428095
NSN: 3110-00-100-3629
FSC: 3110
CAGE: 35311 — AMERICAN STANDARD INC WESTINGHOUSE AIR BRAKE CO DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.0594 INCHES NOMINAL IN
bore_diameter2.0000 INCHES NOMINAL IN
style_designatorSTEEP ANGLE
cone_corner_radius0.1406 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-3629
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 428095 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.0000 INCHES NOMINAL IN
•
CONE WIDTH: 1.0594 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: STEEP ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.0000 INCHES NOMINAL IN
CONE WIDTH1.0594 INCHES NOMINAL IN
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORSTEEP ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
55200Interchangeable
interchangeable cross-reference
interchangeable
1A9859Interchangeable
interchangeable cross-reference
interchangeable
X1-63Interchangeable
interchangeable cross-reference
interchangeable
2452910P1Interchangeable
interchangeable cross-reference
interchangeable
C68Interchangeable
interchangeable cross-reference
interchangeable
C60411AJPC30AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 428095?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 428095?
428095 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 428095?
There are 30 known substitutes for 428095: 55200, 1A9859, X1-63 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 428095?
428095 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3629. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 428095

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026