PartsTable
Technical Data Sheet
Download PDF

42775 — ROTOR,GENERATOR

✓ Government record, cited
Lindy · ORING SEAL
PRODUCT OVERVIEW

42775: ROTOR,GENERATOR.

Plug & Play sound with analogue and SPDIF digital audio support! The USB 2.0 Audio Adapter Pro provides either an analogue or optical audio output, via your computer's USB port. Perfect for gaming, watching movies, listening to music or for Skype and other Voice over IP applications, the Audio Adapter Pro features dedicated buttons to adjust the volume or mute the headphone or microphone.

The supplied software allows Windows users to manage equaliser, mixer, environment settings and virtual speaker positioning for total sound control of the virtual 7.1 channel surround sound feature. This part is cataloged in the U.S. Government catalog under NSN 5340-00-716-9214, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
42775
NSN: 5340-00-716-9214
NIINs: 007169214, 013943784
FSC: 5340 — Hardware, Commercial
CAGE: 58880 — MEGGITT (NEW HAMPSHIRE), INC (USA)
SPECIFICATIONS
special_featuresINCLUDES BEARINGS
NSN5340-00-716-9214
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 42775 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.593 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-17919,TYPE 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.562 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.406 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
WIDTH: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.680 INCHES NOMINAL IN
LENGTH0.593 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-17919,TYPE 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.562 INCHES NOMINAL IN
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.406 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.625 INCHES NOMINAL IN
END ITEM IDENTIFICATIONW/S:HELICOPTER, SEASPRITE H-2; F4N AIRCRAFT
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
6012-3AReference document
Same NSN cross-reference
Reference document — Secondary reference
50-12196-4Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
Manufacturer release date (catalog record)2025-07-01
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 42775?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42775?
42775 is a ROTOR,GENERATOR manufactured by Lindy.
What parts can replace 42775?
There are 2 known substitutes for 42775: 6012-3A, 50-12196-4. Substitute compatibility should be verified for your specific system.
What is the NSN for 42775?
42775 is cataloged in the U.S. Government catalog under NSN 5340-00-716-9214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42775