PartsTable
Technical Data Sheet
Download PDF

427011 — PLATEN,PRINTER

✓ Government record, cited
— · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

427011: PLATEN,PRINTER.

The PLATEN,PRINTER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.500 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN, fastener_length: 6.312 INCHES MINIMUM AND 6.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-042-7011, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 427011
NSN: 5305-00-042-7011
NIINs: 000427011, 013659772
FSC: 5305 — Screws
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class2A A
thread_length1.500 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN
fastener_length6.312 INCHES MINIMUM AND 6.500 INCHES MAXIMUM IN
hardness_rating95.5 ROCKWELL B MINIMUM AND 100.0 ROCKWELL B MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
width_between_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_diameter0.500 INCHES IN
minimum_tensile_strength74000 POUNDS PER SQUARE INCH LBS
NSN5305-00-042-7011
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 427011 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 427011 MFR OEM
KEY FEATURES
•
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
•
FASTENER LENGTH: 6.312 INCHES MINIMUM AND 6.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.500 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN
•
HARDNESS RATING: 95.5 ROCKWELL B MINIMUM AND 100.0 ROCKWELL B MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE,GRADE 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
FASTENER LENGTH6.312 INCHES MINIMUM AND 6.500 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD LENGTH1.500 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN
HARDNESS RATING95.5 ROCKWELL B MINIMUM AND 100.0 ROCKWELL B MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE,GRADE 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
FFS85TYPE2STYLE10PReference document
Same NSN cross-reference
Reference document — Secondary reference
158829Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2BF301Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 427011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 427011?
427011 is a PLATEN,PRINTER. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 427011?
There are 3 known substitutes for 427011: FFS85TYPE2STYLE10P, 158829, 2BF301. Substitute compatibility should be verified for your specific system.
What is the NSN for 427011?
427011 is cataloged in the U.S. Government catalog under NSN 5305-00-042-7011. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 427011

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.