PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 426711
426711 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, face_type: STRAIGHT, bore_style: PLAIN BOTH ENDS, helix_angle: 15.9500 DEGREES, pressure_angle: 25.0000 DEGREES, style_designator: PROTRUDING HUB. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5246, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
426711
NSN: 5340-00-205-5246
FSC: 5340
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
face_typeSTRAIGHT
bore_stylePLAIN BOTH ENDS
helix_angle15.9500 DEGREES
pressure_angle25.0000 DEGREES
style_designatorPROTRUDING HUB
face_nominal_width0.688 INCHES IN
hub_nominal_diameter0.350 INCHES FIRST END IN
hub_style_designatorPLAIN FIRST END
thread_form_quantity4
bore_nominal_diameter0.188 INCHES BOTH ENDS IN
thread_form_directionRIGHT-HAND
NSN5340-00-205-5246
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 426711 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.094 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010
•
HOLE ACCOMMODATION DIAMETER: 1.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
•
NONDEFINITIVE SPEC/STD DATA: 426711 RANGE
•
HEAD OUTSIDE DIAMETER: 1.312 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.094 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010
OVERALL HEIGHT0.344 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER1.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
NONDEFINITIVE SPEC/STD DATA426711 RANGE
HEAD OUTSIDE DIAMETER1.312 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE
STYLE DESIGNATORSTANDARD
PRONG QUANTITY12
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
426711Interchangeable
interchangeable cross-reference
interchangeable
426711-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 426711?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 426711?
426711 is a MICROCIRCUIT,DIGITAL.
What parts can replace 426711?
There are 2 known substitutes for 426711: 426711, 426711-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 426711?
426711 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5246. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 426711

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026