PartsTable
Technical Data Sheet
Download PDF

4255-30REVAPC19 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4255-30REVAPC19: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, outside_diameter: 3.520 INCHES NOMINAL IN, center_hole_diameter: 3.085 INCHES MINIMUM AND 3.115 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.210 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-641-4350, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4255-30REVAPC19
NSN: 5331-00-641-4350
FSC: 5331 — O-ring
CAGE: 89103 — PEARL HARBOR NAVAL SHIPYARD AND INTERMEDIATE MAINTENANCE FACILITY (USA)
SPECIFICATIONS
materialRUBBER
outside_diameter3.520 INCHES NOMINAL IN
center_hole_diameter3.085 INCHES MINIMUM AND 3.115 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.210 INCHES NOMINAL IN
NSN5331-00-641-4350
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4255-30REVAPC19 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.210 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.520 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
CENTER HOLE DIAMETER: 3.085 INCHES MINIMUM AND 3.115 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.210 INCHES NOMINAL IN
OUTSIDE DIAMETER3.520 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
CENTER HOLE DIAMETER3.085 INCHES MINIMUM AND 3.115 INCHES MAXIMUM IN
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES 9
SK46969PC16-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
3600-254REVAPCAN6227-41Reference document
Same NSN cross-reference
Reference document — Secondary reference
575-4801-1443691REVAPC27Reference document
Same NSN cross-reference
Reference document — Secondary reference
11-338Reference document
Same NSN cross-reference
Reference document — Secondary reference
G14601PC46Reference document
Same NSN cross-reference
Reference document — Secondary reference
571-4801-1302061REVAPC27Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4255-30REVAPC19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4255-30REVAPC19?
4255-30REVAPC19 is a O-RING.
What parts can replace 4255-30REVAPC19?
There are 9 known substitutes for 4255-30REVAPC19: SK46969PC16-3, 3600-254REVAPCAN6227-41, 575-4801-1443691REVAPC27 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4255-30REVAPC19?
4255-30REVAPC19 is cataloged in the U.S. Government catalog under NSN 5331-00-641-4350. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4255-30REVAPC19