PartsTable
Technical Data Sheet
4254217 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, housing_bore_diameter: 4.003 INCHES NOMINAL IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 3.437 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-410-3080, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4254217
NSN: 5330-00-410-3080
FSC: 5330
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
housing_bore_diameter4.003 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter3.437 INCHES NOMINAL IN
NSN5330-00-410-3080
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4254217 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HOUSING BORE DIAMETER: 4.003 INCHES NOMINAL IN
CASE STYLE: SQUARE
MATERIAL: LEATHER SEALING ELEMENT
SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER: 3.437 INCHES NOMINAL IN
SEALING ELEMENT STYLE: VERTICAL
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER4.003 INCHES NOMINAL IN
CASE STYLESQUARE
MATERIALLEATHER SEALING ELEMENT
MATERIALSTEEL CASE
SEAL WIDTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER3.437 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
1315-C443Interchangeable
Cartridge,105 Millimeter
interchangeable
75-1-91Interchangeable
Cartridge,105 Millimeter
interchangeable
1315-603-0020Interchangeable
Cartridge,105 Millimeter
interchangeable
75-1-208Interchangeable
Cartridge,105 Millimeter
interchangeable
L00002240Interchangeable
Cartridge,105 Millimeter
interchangeable
L00001240Interchangeable
Cartridge,105 Millimeter
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4254217?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4254217?
4254217 is a SEAL,PLAIN ENCASED.
What parts can replace 4254217?
There are 15 known substitutes for 4254217: 1315-C443, 75-1-91, 1315-603-0020 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4254217?
4254217 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-410-3080. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4254217