PartsTable
Technical Data Sheet
Download PDF

425389 — BOLT,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

425389: BOLT,ASSEMBLED WASHER.

The BOLT,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 1020 OVERALL, head_style: HEXAGON, head_height: 0.208 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.608 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN, fastener_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-042-5389, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
425389
NSN: 5306-00-042-5389
FSC: 5306 — Bolts
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1020 OVERALL
head_styleHEXAGON
head_height0.208 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
thread_class2A A
thread_length0.608 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
washer_quantity1
special_featuresWITH HEADER POINT
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
primary_washer_styleFLAT INTERNAL TEETH
NSN5306-00-042-5389
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 425389 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.208 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 3,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.597 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.608 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.208 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 3,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
PRIMARY WASHER OUTSIDE DIAMETER0.597 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
THREAD LENGTH0.608 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEHEXAGON
PRIMARY WASHER STYLEFLAT INTERNAL TEETH
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 1
5306000425389Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 425389?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 425389?
425389 is a BOLT,ASSEMBLED WASHER.
What parts can replace 425389?
There is 1 known substitute for 425389: 5306000425389. Substitute compatibility should be verified for your specific system.
What is the NSN for 425389?
425389 is cataloged in the U.S. Government catalog under NSN 5306-00-042-5389. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 425389

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.