PartsTable
Technical Data Sheet
Download PDF

42511-02 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

42511-02: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include overall_width: 24.0 INCHES NOMINAL IN, overall_height: 13.0 INCHES NOMINAL IN, overall_length: 19.0 INCHES NOMINAL IN, end_item_identification: ARMED OVERWATCH, part_name_assigned_by_controlling_agency: SHIPPING AND STORAGE CONTAINER,MISCELLANEOUS EQUIPMENT. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0282, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
42511-02
NSN: 3110-00-100-0282
NIINs: 001000282, 017261938
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
overall_width24.0 INCHES NOMINAL IN
overall_height13.0 INCHES NOMINAL IN
overall_length19.0 INCHES NOMINAL IN
end_item_identificationARMED OVERWATCH
part_name_assigned_by_controlling_agencySHIPPING AND STORAGE CONTAINER,MISCELLANEOUS EQUIPMENT
NSN3110-00-100-0282
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 42511-02 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.4440 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.4440 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
559Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B1004Reference document
Same NSN cross-reference
Reference document — Secondary reference
30084Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0042895Reference document
Same NSN cross-reference
Reference document — Secondary reference
BT559Reference document
Same NSN cross-reference
Reference document — Secondary reference
253971R91Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 42511-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42511-02?
42511-02 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 42511-02?
There are 7 known substitutes for 42511-02: 559, B1004, 30084 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 42511-02?
42511-02 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0282. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42511-02