PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 424822
424822 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.250 INCHES NOMINAL IN, pin_overall_diameter: 0.0920 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.010 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-042-4822, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
424822
NSN: 5315-00-042-4822
FSC: 5315
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
first_end_styleCHAMFERED
pin_overall_length0.250 INCHES NOMINAL IN
pin_overall_diameter0.0920 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES NOMINAL IN
material_document_and_classificationQQ-B-611 COMP B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-042-4822
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 424822 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-611 COMP B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL DIAMETER: 0.0920 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-611 COMP B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL LENGTH0.250 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
PIN OVERALL DIAMETER0.0920 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
0525-65Interchangeable
interchangeable cross-reference
interchangeable
280-1146P98Interchangeable
interchangeable cross-reference
interchangeable
RCR32G472KSInterchangeable
interchangeable cross-reference
interchangeable
2012-T 30Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751 TYCInterchangeable
interchangeable cross-reference
interchangeable
13330Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 424822?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 424822?
424822 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 424822?
There are 18 known substitutes for 424822: 0525-65, 280-1146P98, RCR32G472KS and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 424822?
424822 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-042-4822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 424822

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026