PartsTable
Technical Data Sheet
Download PDF

423D3058-5 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

423D3058-5: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.143 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN, diameter: 0.7920 INCHES NOMINAL IN, material: STEEL COMP 4340 OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.060 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-486-2883, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
423D3058-5
NSN: 5315-01-486-2883
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 77272 — THE BOEING COMPANY (USA)
SPECIFICATIONS
height0.143 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
diameter0.7920 INCHES NOMINAL IN
materialSTEEL COMP 4340 OVERALL
head_styleFLAT CHAMFER
chamfer_length0.060 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter1.000 INCHES NOMINAL IN
under_head_length1.200 INCHES NOMINAL IN
end_item_identificationHELICOPTER, SEA KNIGHT H-46
material_document_and_classificationAMS 6414 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyPIN, AFT ROTOR SHAFT
NSN5315-01-486-2883
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 423D3058-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.060 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 1.200 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6414 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.7920 INCHES NOMINAL IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.060 INCHES NOMINAL IN
UNDER HEAD LENGTH1.200 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER1.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6414 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.7920 INCHES NOMINAL IN
HEAD STYLEFLAT CHAMFER
HEIGHT0.143 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPIN, AFT ROTOR SHAFT
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 423D3058-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 423D3058-5?
423D3058-5 is a PIN,STRAIGHT,HEADED.
What is the NSN for 423D3058-5?
423D3058-5 is cataloged in the U.S. Government catalog under NSN 5315-01-486-2883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 423D3058-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.