PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 42367D
42367D ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OR PAPER AND RUBBER SYNTHETIC OVERALL, outside_diameter: 0.812 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.625 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-247-3567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
42367D
NSN: 5330-00-247-3567
FSC: 5330
CAGE: 92679 — NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OR PAPER AND RUBBER SYNTHETIC OVERALL
outside_diameter0.812 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.625 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-247-3567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 42367D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.812 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OR PAPER AND RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OUTSIDE DIAMETER0.812 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER0.625 INCHES NOMINAL IN
MATERIALPAPER AND GLUE AND GLYCERIN OR PAPER AND RUBBER SYNTHETIC OVERALL
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
7494Interchangeable
interchangeable cross-reference
interchangeable
122SB11Interchangeable
interchangeable cross-reference
interchangeable
7494V1AInterchangeable
interchangeable cross-reference
interchangeable
BB7311Interchangeable
interchangeable cross-reference
interchangeable
00737 TY SH ST 164Interchangeable
interchangeable cross-reference
interchangeable
7494 01496Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 42367D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42367D?
42367D is a GASKET.
What parts can replace 42367D?
There are 8 known substitutes for 42367D: 7494, 122SB11, 7494V1A and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 42367D?
42367D is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-247-3567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42367D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026