PartsTable
Technical Data Sheet
Download PDF

423435 — CARTRIDGE,COMPRESSED GAS

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

423435: CARTRIDGE,COMPRESSED GAS.

The CARTRIDGE,COMPRESSED GAS is a the manufacturer industrial component. Key specifications include material: STEEL PROPERTY CLASS 8.8 OVERALL, head_style: HEXAGON, head_height: 5.10 MILLIMETERS MINIMUM AND 5.50 MILLIMETERS MAXIMUM MM, thread_length: 32.5 MILLIMETERS MINIMUM AND 35.5 MILLIMETERS MAXIMUM MM, fastener_length: 34.50 MILLIMETERS MINIMUM AND 35.50 MILLIMETERS MAXIMUM MM, hardness_rating: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-042-3435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
423435
NSN: 5305-00-042-3435
NIINs: 000423435, 012280555, 015690475
FSC: 5305 — Screws
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL PROPERTY CLASS 8.8 OVERALL
head_styleHEXAGON
head_height5.10 MILLIMETERS MINIMUM AND 5.50 MILLIMETERS MAXIMUM MM
thread_length32.5 MILLIMETERS MINIMUM AND 35.5 MILLIMETERS MAXIMUM MM
fastener_length34.50 MILLIMETERS MINIMUM AND 35.50 MILLIMETERS MAXIMUM MM
hardness_rating23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentZINC AND DICHROMATE OVERALL
width_between_flats12.73 MILLIMETERS MINIMUM AND 13.00 MILLIMETERS MAXIMUM MM
nominal_thread_diameter8.0 MILLIMETERS MM
minimum_tensile_strength116000 POUNDS PER SQUARE INCH LBS
thread_series_designatorM
NSN5305-00-042-3435
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 423435 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.466 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.375 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
FASTENER LENGTH0.375 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
PRIMARY WASHER OUTSIDE DIAMETER0.466 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
THREAD LENGTH0.375 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEROUND
PRIMARY WASHER STYLEFLAT INTERNAL TEETH
SUBSTITUTES & CROSS-REFERENCES 1
5305000423435Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 423435?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 423435?
423435 is a CARTRIDGE,COMPRESSED GAS.
What parts can replace 423435?
There is 1 known substitute for 423435: 5305000423435. Substitute compatibility should be verified for your specific system.
What is the NSN for 423435?
423435 is cataloged in the U.S. Government catalog under NSN 5305-00-042-3435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 423435

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.