42341 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited

Lindy · MRO · MRO_GENERAL

PRODUCT OVERVIEW

42341: RESISTOR,VARIABLE,NONWIRE WOUND,.

Please Note - Not for use with HDMI monitors, graphics cards, notebooks or PCs as Deep Colour and 3D are not supported, use our HDMI KVM Switch Additional USB accessories can be attached using a USB Hub (not included) Supports USB 2.0 speeds of up to 480Mbit/sec LED indicators for each active port Switch via the attached desktop switching button, the supplied software or keyboard hot keys Featuring integrated cables for quick installation this KVM switch allows two DVI-D equipped PCs to be controlled from a single keyboard, mouse and monitor. Simply connect the cables to your computers and attach a keyboard, mouse and monitor to the switch and you're ready to start. The two additional 3.5mm audio ports allow users to connect headphones and a microphone while extra USB peripherals can also be attached with the addition of a USB hub.

Please note: Software control and hotkey switching are not currently compatible with devices supporting macOS 10.15. This is du This part is cataloged in the U.S. Government catalog under NSN 5905-00-500-5477, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS

MRO→ MRO_GENERAL→ 42341

NSN: 5905-00-500-5477
NIINs: 005005477, 009011082, 010888595, 012498206
FSC: 5905 — Resistor
CAGE: 11237 — CTS CORP OF CALIFORNIA DBA CTS ELECTRONICS CORP PASO ROBLES DIV ELECTROMECHANICAL GROUP (USA)

SPECIFICATIONS

material	STEEL
base_style	MINIATURE BAYONET
body_style	CYLINDRICAL BUSHING MOUNTED
bulb_style	T (TUBULAR)
body_length	0.562 INCHES NOMINAL IN
flat_height	0.188 INCHES NOMINAL IN
shaft_style	ROUND, PARALLEL FLATTED
shaft_length	0.750 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
body_diameter	1.094 INCHES NOMINAL IN
overall_width	0.800 INCHES NOMINAL IN
overall_height	0.260 INCHES NOMINAL IN
NSN	5905-00-500-5477

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 1.094 INCHES NOMINAL IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 100.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 120.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL IN

•

NONTURN DEVICE RADIUS: 0.531 INCHES NOMINAL IN

•

BODY STYLE: CYLINDRICAL BUSHING MOUNTED

TECHNICAL CHARACTERISTICS

BODY DIAMETER	1.094 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	100.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	120.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS	0.531 INCHES NOMINAL IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
FIRST FLAT LENGTH	0.219 INCHES NOMINAL IN
MOUNTING METHOD	STANDARD BUSHING

SUBSTITUTES & CROSS-REFERENCES 1

SM-B-72833Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 42341?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 42341?

42341 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).

What parts can replace 42341?

There is 1 known substitute for 42341: SM-B-72833. Substitute compatibility should be verified for your specific system.

What is the NSN for 42341?

42341 is cataloged in the U.S. Government catalog under NSN 5905-00-500-5477. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

42341 — RESISTOR,VARIABLE,NONWIRE WOUND,

Request a Quote — 42341