PartsTable
Technical Data Sheet
Download PDF

42312 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

42312: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include end_item_identification: NSC-420 (WMSL-750). This part is cataloged in the U.S.

Government catalog under NSN 5305-00-432-4388, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
42312
NSN: 5305-00-432-4388
NIINs: 004324388, 011488595, 012400050, 015616413
FSC: 5305 — Screws
CAGE: 73734 — FEDERAL SCREW PRODUCTS, INC. (USA)
SPECIFICATIONS
end_item_identificationNSC-420 (WMSL-750)
NSN5305-00-432-4388
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 42312 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
FEATURES PROVIDED: CASEHARDENED
•
HEAD STYLE: FLAT COUNTERSUNK
•
NONDEFINITIVE SPEC/STD DATA: AB TYPE
•
SURFACE TREATMENT: CADMIUM OVERALL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.138 INCHES IN
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEFLAT COUNTERSUNK
NONDEFINITIVE SPEC/STD DATAAB TYPE
SURFACE TREATMENTCADMIUM OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
MS51862-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FFS107Reference document
Same NSN cross-reference
Reference document — Identification reference
MS24619-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
42312ADXReference document
Same NSN cross-reference
Reference document — Secondary reference
MS24615-14Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 42312?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42312?
42312 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 42312?
There are 5 known substitutes for 42312: MS51862-14, FFS107, MS24619-12 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 42312?
42312 is cataloged in the U.S. Government catalog under NSN 5305-00-432-4388. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42312

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.