PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 42311ADX
42311ADX ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, fastener_length: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, features_provided: CASEHARDENED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-432-4387, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
42311ADX
NSN: 5305-00-432-4387
FSC: 5305
CAGE: 1VN02 — AIRDALE EXPRESS LLC DIV AIRDALE EXPRESS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
fastener_length0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
features_providedCASEHARDENED
surface_treatmentCADMIUM OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_dataAB TYPE
nonmachine_nominal_thread_diameter0.138 INCHES IN
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5305-00-432-4387
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 42311ADX · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NONDEFINITIVE SPEC/STD DATA: AB TYPE
•
HEAD STYLE: FLAT COUNTERSUNK
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
HEAD DIAMETER: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
NONMACHINE NOMINAL THREAD DIAMETER0.138 INCHES IN
SURFACE TREATMENTCADMIUM OVERALL
NONDEFINITIVE SPEC/STD DATAAB TYPE
HEAD STYLEFLAT COUNTERSUNK
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALSTEEL OVERALL
HEAD DIAMETER0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
MS24619-11Interchangeable
interchangeable cross-reference
interchangeable
42-311Interchangeable
interchangeable cross-reference
interchangeable
508-01436-131Interchangeable
interchangeable cross-reference
interchangeable
NON27512ELInterchangeable
interchangeable cross-reference
interchangeable
4231Interchangeable
interchangeable cross-reference
interchangeable
MS51862-13Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 42311ADX?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42311ADX?
42311ADX is a SCREW,TAPPING.
What parts can replace 42311ADX?
There are 7 known substitutes for 42311ADX: MS24619-11, 42-311, 508-01436-131 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 42311ADX?
42311ADX is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-432-4387. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42311ADX

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026