PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 42305
42305 ✓ Verified by PartsTable
schleich · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TRANSFORMER,POWER is a schleich industrial component. Key specifications include angle: 15.0 DEGREES NOMINAL, material: RUBBER SILICONE CLASS Q OVERALL, body_width: 3.750 INCHES MAXIMUM IN, point_type: SPLIT, body_height: 4.500 INCHES MAXIMUM IN, body_length: 4.000 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-391-8631, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
42305
NSN: 5330-00-391-8631
FSC: 5330
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
angle15.0 DEGREES NOMINAL
materialRUBBER SILICONE CLASS Q OVERALL
body_width3.750 INCHES MAXIMUM IN
point_typeSPLIT
body_height4.500 INCHES MAXIMUM IN
body_length4.000 INCHES MAXIMUM IN
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length1.375 INCHES NOMINAL IN
hole_diameter0.234 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.750 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT ALL WINDING
NSN5330-00-391-8631
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 42305 MFR: schleich ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.125 INCHES NOMINAL IN
•
ANGLE: 15.0 DEGREES NOMINAL
•
PERIPHERAL DIAMETER: 1.500 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
•
INNER GROOVE WIDTH: 0.126 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
INNER GROOVE DEPTH: 0.094 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.125 INCHES NOMINAL IN
ANGLE15.0 DEGREES NOMINAL
PERIPHERAL DIAMETER1.500 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
INNER GROOVE WIDTH0.126 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
INNER GROOVE DEPTH0.094 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
RIM SURFACE WIDTH0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
60179Interchangeable
interchangeable cross-reference
interchangeable
42305Interchangeable
interchangeable cross-reference
interchangeable
1248008Interchangeable
interchangeable cross-reference
interchangeable
3313 EInterchangeable
interchangeable cross-reference
interchangeable
NAS907 TYFSZEInterchangeable
interchangeable cross-reference
interchangeable
B42305Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 42305?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42305?
42305 is a TRANSFORMER,POWER manufactured by schleich.
What parts can replace 42305?
There are 7 known substitutes for 42305: 60179, 42305, 1248008 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 42305?
42305 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-391-8631. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42305

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026