PartsTable
Technical Data Sheet
Download PDF

422513-1 — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

422513-1: RESISTOR,FIXED,WIRE WOUND.

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include end_item_identification: USED ON ADATS-M113A2. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-131-7738, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
422513-1
NSN: 4730-00-131-7738
NIINs: 001317738, 013756143
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 80020 — NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL (USA)
SPECIFICATIONS
end_item_identificationUSED ON ADATS-M113A2
NSN4730-00-131-7738
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 422513-1 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL WIDTH ACROSS FLATS: 0.343 INCHES ALL ENDS IN
•
NOMINAL LENGTH: 0.375 INCHES ALL ENDS IN
•
NOMINAL WIDTH: 0.375 INCHES ALL ENDS IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
NOMINAL WIDTH ACROSS FLATS0.343 INCHES ALL ENDS IN
NOMINAL LENGTH0.375 INCHES ALL ENDS IN
SPECIAL FEATURESBRASS, SELF-THREADING, REUSABLE. 11765 BUNA-N HOSE 3814-VINYL HOSE AND CLIPPARD HOSE FITTINGS. SLIP SLEEVE OVER HOSE, PUSH ONTO FITTING, THEN SCREW INTO PLACE; TIGHTEN WITH WRENCH.
NOMINAL WIDTH0.375 INCHES ALL ENDS IN
PART NAME ASSIGNED BY CONTROLLING AGENCYHOSE COUPLING
END ITEM IDENTIFICATION4940-01-445-0086
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
1211-0036Reference document
Same NSN cross-reference
Reference document — Secondary reference
1211-0036-P5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
G770715-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5000-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
247-004-0003Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 422513-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 422513-1?
422513-1 is a RESISTOR,FIXED,WIRE WOUND.
What parts can replace 422513-1?
There are 5 known substitutes for 422513-1: 1211-0036, 1211-0036-P5, G770715-2 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 422513-1?
422513-1 is cataloged in the U.S. Government catalog under NSN 4730-00-131-7738. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 422513-1