PartsTable
Technical Data Sheet
42212 ✓ Verified by PartsTable
schleich · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Pretty dangerous and pretty cute. Four little dinosaurs, two robbers and two herbivores. One must not mistake the small ones, the teeth of the small T-Rex and Spinosaurus are already pretty long and quite sharp.

A small Triceratops and a young Saichania are almost as defensive as their parents and all four are surely determined to fight. But they are just too sweet. - Fun Fact : As reptiles, dinosaurs would all – in theory – have hat to hatch from eggs.

Yet it is still not known whether some of them were born live: if they weren’t, their eggs would have been gigantic. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-8553, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
42212
NSN: 5310-00-011-8553
FSC: 5310
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
coverNOT PROVIDED
depth2.500 INCHES NOMINAL IN
materialSTEEL OVERALL
nut_styleHEXAGON
body_width1.563 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
cone_width1.3750 INCHES NOMINAL IN
nut_height0.102 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
point_typeNOTCHED
body_height2.250 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
body_length1.563 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
NSN5310-00-011-8553
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 42212 · schleich ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
NOMINAL THREAD SIZE: 0.138 INCHES IN
BEARING SURFACE TYPE: FLAT
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
THREAD CLASS: 2B
NUT STYLE: HEXAGON
NUT HEIGHT: 0.102 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH32
NOMINAL THREAD SIZE0.138 INCHES IN
BEARING SURFACE TYPEFLAT
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS2B
NUT STYLEHEXAGON
NUT HEIGHT0.102 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-611-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
42212Interchangeable
interchangeable cross-reference
interchangeable
D42212Interchangeable
interchangeable cross-reference
interchangeable
675256Interchangeable
interchangeable cross-reference
interchangeable
540-6786-002Interchangeable
interchangeable cross-reference
interchangeable
118-553Interchangeable
interchangeable cross-reference
interchangeable
742891-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 42212?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42212?
42212 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by schleich.
What parts can replace 42212?
There are 18 known substitutes for 42212: 42212, D42212, 675256 and 15 more. Substitute compatibility should be verified for your specific system.
Is 42212 still available?
42212 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42212