PartsTable
Technical Data Sheet
Download PDF

4217-4 — COIL,RADIO FREQUENCY

✓ Government record, cited
schleich · NUT WASHER
PRODUCT OVERVIEW

4217-4: COIL,RADIO FREQUENCY.

The elves have built a wonderful stable for the pegasus and the unicorn. These marvellous, rare creatures can spend the night there whenever they like - and everyone is sure to take good care of them. Elven buildings are created using magic so that no plants and no trees are injured.

The elves love unicorns and winged horses, and so they have built a marvellous stable specially for these freedom-loving creatures. They can spend the night there whenever they want and sleep in peace while the elves tend to their every need, bringing them fresh water and the choicest food. Sometimes, the elves are allowed to stroke the unicorns' coats or even touch their magical horn - for good luck, of course!

This part is cataloged in the U.S. Government catalog under NSN 5310-00-021-8196, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
4217-4
NSN: 5310-00-021-8196
NIINs: 000218196, 002275966, 011164480, 014579878
FSC: 5310 — Nuts and Washers
CAGE: 14892 — BENDIX CORP THE BRAKE AND STEERING DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
body_width0.402 INCHES NOMINAL IN
nut_height0.484 INCHES NOMINAL IN
point_typeCONVENTIONAL
body_height0.355 INCHES NOMINAL IN
body_length0.402 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length7.250 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
NSN5310-00-021-8196
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4217-4 · schleich ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.000 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY NUT HEIGHT
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
NUT HEIGHT: 0.484 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.000 INCHES NOMINAL IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY NUT HEIGHT
NONDEFINITIVE SPEC/STD DATAA TYPE
NUT HEIGHT0.484 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 6
5T558Reference document
Same NSN cross-reference
Reference document — Secondary reference
218196Reference document
Same NSN cross-reference
Reference document — Secondary reference
NF58T96Reference document
Same NSN cross-reference
Reference document — Secondary reference
13X14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
P21Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2027Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 4217-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4217-4?
4217-4 is a COIL,RADIO FREQUENCY manufactured by schleich.
What parts can replace 4217-4?
There are 6 known substitutes for 4217-4: 5T558, 218196, NF58T96 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4217-4?
4217-4 is cataloged in the U.S. Government catalog under NSN 5310-00-021-8196. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4217-4