PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 421099
421099 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: TITANIUM OVERALL, special_features: 1.3MM BY 100MM MM, part_name_assigned_by_controlling_agency: IMPLANT MESH SURGICAL TITANIUM 1.3MM X 100MM MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-282-1333, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
421099
NSN: 5315-00-282-1333
FSC: 5315
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialTITANIUM OVERALL
special_features1.3MM BY 100MM MM
part_name_assigned_by_controlling_agencyIMPLANT MESH SURGICAL TITANIUM 1.3MM X 100MM MM
NSN5315-00-282-1333
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 421099 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST END TAPER LENGTH: 0.020 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.0810 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 0.250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
FIRST END TAPER LENGTH0.020 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.0810 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH0.250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
02-0413Interchangeable
interchangeable cross-reference
interchangeable
421.099Interchangeable
interchangeable cross-reference
interchangeable
6515NCM010412Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 421099?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 421099?
421099 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 421099?
There are 3 known substitutes for 421099: 02-0413, 421.099, 6515NCM010412. Substitute compatibility should be verified for your specific system.
What is the NSN for 421099?
421099 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-282-1333. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 421099

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026