PartsTable
Technical Data Sheet
42040 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

Sandberg Foldable Solar Charger is a highly efficient solar panel that converts sunlight to electricity. It features 2 USB outlets that can be used for charging your USB devices, such as smartphone, tablet or powerbank. By connecting to a powerbank, you can save the electricity there for later charging of your smartphone or you can use it as a stabilising intermediary when charging (if your powerbank supports simultaneous power in and out).

The USB outputs are placed in a practical zipper pocket with plenty of room for your USB gear. The supplied snap hooks can for instance be used for attaching the solar panel to your backpack when you are on an adventure. This is green energy for your equipment! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-140-0852, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 42040
NSN: 5998-01-140-0852
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 06141 — L3 AVIATION PRODUCTS, INC. DBA L3 TECHNOLOGIES (USA)
SPECIFICATIONS
length50.0 MILLIMETERS NOMINAL MM
materialTITANIUM OVERALL
thickness0.4 MILLIMETERS NOMINAL MM
special_featuresUNIVERSAL ORBITAL FLOOR PLATE, 1.0MM;FOR CRANIOFACIAL IMPLANT PROCEDURES; SIZE:50MM BY 5MM MM
design_designationSYNTHES
part_name_assigned_by_controlling_agencyORBITAL FLOOR PLATE UNIVERSAL 50MM X 5MM FOR CRANIOFACIAL IMPLANT MM
NSN5998-01-140-0852
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 42040 MFR Sandberg RESISTOR,VARIABLE,WIRE WOUND,NON
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH6.000 INCHES NOMINAL IN
SPECIAL FEATURESPRINTED WIRING BOARD 1,DISPLAY 7,MICROCIRCUIT 17,CAPACITOR 3,RESISTOR 10, REFERENCE DATA: TI-6560.15, FA-10240, LLWAS, PG 6-2
END ITEM IDENTIFICATIONLLWAS, FA-10240
OVERALL HEIGHT1.000 INCHES NOMINAL IN
OVERALL LENGTH6.000 INCHES NOMINAL IN
OVERALL WIDTH6.000 INCHES NOMINAL IN
SPECIAL FEATURESPRINTED WIRING BOARD 1,DISPLAY 7,MICROCIRCUIT 17,CAPACITOR 3,RESISTOR 10, REFERENCE DATA: TI-6560.15, FA-10240, LLWAS, PG 6-2
END ITEM IDENTIFICATIONLLWAS, FA-10240
OVERALL HEIGHT1.000 INCHES NOMINAL IN
OVERALL LENGTH6.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
42040Interchangeable
interchangeable cross-reference
interchangeable
68A3571Interchangeable
interchangeable cross-reference
interchangeable
5BCInterchangeable
interchangeable cross-reference
interchangeable
207802Interchangeable
interchangeable cross-reference
interchangeable
D643Interchangeable
interchangeable cross-reference
interchangeable
TT2146Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 42040?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42040?
42040 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 42040?
There are 12 known substitutes for 42040: 42040, 68A3571, 5BC and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 42040?
42040 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-140-0852. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42040