PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 42011-29PC42
42011-29PC42 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: COPPER OVERALL, outside_diameter: 1.500 INCHES NOMINAL IN, aperture_diameter: 1.334 INCHES NOMINAL IN, cross-sectional_thickness: 0.406 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-300-6271, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
42011-29PC42
NSN: 5330-00-300-6271
FSC: 5330
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialCOPPER OVERALL
outside_diameter1.500 INCHES NOMINAL IN
aperture_diameter1.334 INCHES NOMINAL IN
cross-sectional_thickness0.406 INCHES NOMINAL IN
NSN5330-00-300-6271
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 42011-29PC42 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.406 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.334 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER OVERALL
CROSS-SECTIONAL THICKNESS0.406 INCHES NOMINAL IN
OUTSIDE DIAMETER1.500 INCHES NOMINAL IN
APERTURE DIAMETER1.334 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
30622Interchangeable
interchangeable cross-reference
interchangeable
9139626Interchangeable
interchangeable cross-reference
interchangeable
22-090-1120Interchangeable
interchangeable cross-reference
interchangeable
60812Interchangeable
interchangeable cross-reference
interchangeable
01T4813Interchangeable
interchangeable cross-reference
interchangeable
3G2139Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 42011-29PC42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42011-29PC42?
42011-29PC42 is a GASKET.
What parts can replace 42011-29PC42?
There are 15 known substitutes for 42011-29PC42: 30622, 9139626, 22-090-1120 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 42011-29PC42?
42011-29PC42 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-300-6271. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42011-29PC42

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026