PartsTable
Technical Data Sheet
Download PDF

420-90PC4 3-4 — PLUNGER

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

420-90PC4 3-4: PLUNGER.

The PLUNGER is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, body_length: 2.718 INCHES MAXIMUM IN, closure_type: LOCKING SCREW CAP, thread_class: 3A ALL THREADED STUD A, overall_width: 11.000 INCHES NOMINAL IN, terminal_type: CONNECTOR, RECEPTACLE. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-336-9319, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
420-90PC4 3-4
NSN: 4730-00-336-9319
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 60532 — TRANE U.S. INC. DBA THE TRANE CO DIV TRANE HEADQUARTERS (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
body_length2.718 INCHES MAXIMUM IN
closure_typeLOCKING SCREW CAP
thread_class3A ALL THREADED STUD A
overall_width11.000 INCHES NOMINAL IN
terminal_typeCONNECTOR, RECEPTACLE
thread_length0.620 INCHES NOMINAL ALL THREADED STUD IN
overall_height5.500 INCHES NOMINAL IN
overall_length19.000 INCHES NOMINAL IN
proof_pressure120.00 POUNDS PER SQUARE INCH LBS
capacity_rating3.0 LITERS
furnished_itemsROLL UP POUCH
NSN4730-00-336-9319
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 420-90PC4 3-4 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 10
LSD22S3802-260375PC4 3-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
DD828S4810-317370PC7 3-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
CB1S3802-309457PC4 3-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
CV22S48-497PC4 3-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
CL55S38-48PC4 3-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
DD692S4810-244948PC4 3-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 420-90PC4 3-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 420-90PC4 3-4?
420-90PC4 3-4 is a PLUNGER.
What parts can replace 420-90PC4 3-4?
There are 10 known substitutes for 420-90PC4 3-4: LSD22S3802-260375PC4 3-4, DD828S4810-317370PC7 3-4, CB1S3802-309457PC4 3-4 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 420-90PC4 3-4?
420-90PC4 3-4 is cataloged in the U.S. Government catalog under NSN 4730-00-336-9319. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 420-90PC4 3-4