PartsTable
Technical Data Sheet
PartsTable / MRO / 420-017
420-017 ✓ Verified by PartsTable
Legrand · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

Can be mounted on rail or on plate in XL³ cabinets and enclosures<br>MCCBs for switching, control isolation and protection of low voltage electrical lines<br>Supplied with fixing screws cage terminals 70 mm² max. (flexible cable) or 95 mm² max. rigid cable with accessories<br>Can be fitted with DPX³ 160 and 250 common auxiliaries and accessories<br>Conform to IEC 60947-2 This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-243-5732, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 420-017
NSN: 5999-01-243-5732
FSC: 5999
CAGE: 89305 — SIMMONDS PRECISION PRODUCTS INC (USA)
SPECIFICATIONS
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
body_height0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
body_length0.785 INCHES MAXIMUM IN
body_diameter0.320 INCHES NOMINAL IN
overall_width5.000 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
overall_height0.750 INCHES NOMINAL IN
overall_length6.500 INCHES NOMINAL IN
special_featuresCAPACITOR 20; DIODE 10; MICROCIRCUIT 3; PWB 1; RESISTOR 40; TRANSISTOR 6; FUNCTION, CCA, PRIMARY POWER SUPPLY; REFERENCE DATA, FIG 16, TI-6670.7, FA-10144, PG 4-28
style_designatorAXIAL TERMINAL EACH END
features_providedHERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND RESETTABLE AND EDGE TRIGGERED
NSN5999-01-243-5732
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 420-017 MFR Legrand RESISTOR,VARIABLE,WIRE WOUND,NON
KEY FEATURES
•
OVERALL DIAMETER: 0.059 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY AND BERYLLIUM BODY AND CONTACT
•
PIN ACCOMMODATION DIAMETER: 0.018 INCHES NOMINAL IN
•
PIN ACCOMMODATION LENGTH: 0.090 INCHES NOMINAL IN
•
MOUNTING METHOD: FORCE FIT
•
CABLE ENTRANCE DIAMETER: 0.023 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.059 INCHES NOMINAL IN
MATERIALCOPPER ALLOY AND BERYLLIUM BODY AND CONTACT
PIN ACCOMMODATION DIAMETER0.018 INCHES NOMINAL IN
PIN ACCOMMODATION LENGTH0.090 INCHES NOMINAL IN
MOUNTING METHODFORCE FIT
OVERALL LENGTH0.142 INCHES NOMINAL IN
CABLE ENTRANCE DIAMETER0.023 INCHES NOMINAL IN
OVERALL DIAMETER0.059 INCHES NOMINAL IN
MATERIALCOPPER ALLOY AND BERYLLIUM BODY AND CONTACT
PIN ACCOMMODATION DIAMETER0.018 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
6-330808-9Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 420-017?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 420-017?
420-017 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 420-017?
There is 1 known substitute for 420-017: 6-330808-9. Substitute compatibility should be verified for your specific system.
What is the NSN for 420-017?
420-017 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-243-5732. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 420-017

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026