PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 42-P-6486-110
42-P-6486-110 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.062 INCHES NOMINAL IN, material: STEEL OVERALL, style_designator: STANDARD, underloop_length: 0.750 INCHES NOMINAL IN, surface_treatment: ZINC OVERALL, nondefinitive_spec/std_data: B TYPE AND 2 CLASS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-255-0606, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
42-P-6486-110
NSN: 5315-00-255-0606
FSC: 5315
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
diameter0.062 INCHES NOMINAL IN
materialSTEEL OVERALL
style_designatorSTANDARD
underloop_length0.750 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
nondefinitive_spec/std_dataB TYPE AND 2 CLASS
NSN5315-00-255-0606
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 42-P-6486-110 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STANDARD
•
UNDERLOOP LENGTH: 0.750 INCHES NOMINAL IN
•
DIAMETER: 0.062 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 2 CLASS
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSTANDARD
UNDERLOOP LENGTH0.750 INCHES NOMINAL IN
DIAMETER0.062 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATAB TYPE AND 2 CLASS
SURFACE TREATMENTZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
WWS 54003-3500Interchangeable
interchangeable cross-reference
interchangeable
940.17.02.226Interchangeable
interchangeable cross-reference
interchangeable
184090Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 42-P-6486-110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 42-P-6486-110?
42-P-6486-110 is a PIN,COTTER.
What parts can replace 42-P-6486-110?
There are 3 known substitutes for 42-P-6486-110: WWS 54003-3500, 940.17.02.226, 184090. Substitute compatibility should be verified for your specific system.
What is the NSN for 42-P-6486-110?
42-P-6486-110 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-255-0606. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 42-P-6486-110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026