PartsTable
Technical Data Sheet
41J ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,AIR DIELECTRI. Key specifications include material: STEEL LOCATION NOT OTHERWISE SPECIFIED, body_shape: ROUND, design_type: JACKETED, inlet_location: CENTRALLY LOCATED ON END OF BODY, muffler_design: STRAIGHT THROUGH, overall_length: 34.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-218-1777, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
41J
NSN: 5340-00-218-1777
FSC: 5340
CAGE: 87737 — TAYLOR LOCK CO (USA)
SPECIFICATIONS
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
body_shapeROUND
design_typeJACKETED
tube_quantity1
inlet_locationCENTRALLY LOCATED ON END OF BODY
muffler_designSTRAIGHT THROUGH
overall_length34.000 INCHES NOMINAL IN
outlet_locationCENTRALLY LOCATED ON END OF BODY
overall_diameter5.000 INCHES NOMINAL IN
surface_treatmentALUMINUM OR ZINC
operating_positionHORIZONTAL
inlet_connection_typeUNTHREADED SINGLE INLET
NSN5340-00-218-1777
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 41J MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESBRASS OR NICKEL SILVER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
360Upgraded Successor
successor cross-reference
successor
N2412-24Upgraded Successor
successor cross-reference
successor
182CInterchangeable
interchangeable cross-reference
interchangeable
182CINDUCT0RInterchangeable
interchangeable cross-reference
interchangeable
18-2BInterchangeable
interchangeable cross-reference
interchangeable
18-1-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 41J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41J?
41J is a CAPACITOR,VARIABLE,AIR DIELECTRI.
What parts can replace 41J?
There are 10 known substitutes for 41J: 360, N2412-24, 182C and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41J?
41J is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-218-1777. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41J