PartsTable
Technical Data Sheet
Download PDF

4199999001 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4199999001: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE NITRILE, center_hole_diameter: 0.301 INCHES NOMINAL IN, cross-sectional_height: 0.070 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: O-RING,TAB,HNBR. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-504-9370, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4199999001
NSN: 5331-01-504-9370
FSC: 5331 — O-ring
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE NITRILE
center_hole_diameter0.301 INCHES NOMINAL IN
cross-sectional_height0.070 INCHES NOMINAL IN
end_item_identificationMRAP - M-ATV; 4210-01-622-0440; 2320-01-652-5218 JOINT LIGHT TACTICAL VEHICLE (JLTV); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
part_name_assigned_by_controlling_agencyO-RING,TAB,HNBR
NSN5331-01-504-9370
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4199999001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
COLOR: GREEN
•
CENTER HOLE DIAMETER: 0.301 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE NITRILE
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
COLORGREEN
CENTER HOLE DIAMETER0.301 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYO-RING,TAB,HNBR
END ITEM IDENTIFICATIONMRAP - M-ATV; 4210-01-622-0440; 2320-01-652-5218 JOINT LIGHT TACTICAL VEHICLE (JLTV); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
MATERIALRUBBER BUTADIENE NITRILE
SUBSTITUTES & CROSS-REFERENCES 5
N1195-70 2-011Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
59RG-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
23KP962Reference document
Same NSN cross-reference
Reference document — Secondary reference
12601622-001Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
4199999Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4199999001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4199999001?
4199999001 is a O-RING.
What parts can replace 4199999001?
There are 5 known substitutes for 4199999001: N1195-70 2-011, 59RG-6, 23KP962 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4199999001?
4199999001 is cataloged in the U.S. Government catalog under NSN 5331-01-504-9370. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4199999001