PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4198008-014
4198008-014 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.088 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, hardness_rating: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM, outside_diameter: 0.165 INCHES NOMINAL IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-2950, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4198008-014
NSN: 5310-00-058-2950
FSC: 5310
CAGE: 05869 — RAYTHEON COMPANY DIV RMD STRATEGIC (USA)
SPECIFICATIONS
hole_diameter0.088 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
outside_diameter0.165 INCHES NOMINAL IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-058-2950
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4198008-014 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.165 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 1080 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 3140 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 3310H OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
•
HOLE DIAMETER: 0.088 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.165 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 1080 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 3140 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 3310H OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
HOLE DIAMETER0.088 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
MATERIAL THICKNESS0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
AN9-35Interchangeable
interchangeable cross-reference
interchangeable
FFW84Interchangeable
interchangeable cross-reference
interchangeable
310007200Interchangeable
interchangeable cross-reference
interchangeable
MS35337-77Interchangeable
interchangeable cross-reference
interchangeable
305-115-0201Interchangeable
interchangeable cross-reference
interchangeable
310-0070-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4198008-014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4198008-014?
4198008-014 is a WASHER,LOCK.
What parts can replace 4198008-014?
There are 18 known substitutes for 4198008-014: AN9-35, FFW84, 310007200 and 15 more. Substitute compatibility should be verified for your specific system.
Is 4198008-014 still available?
4198008-014 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4198008-014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026