PartsTable
Technical Data Sheet
Download PDF

4197021 — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4197021: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 1.0 INCHES NOMINAL IN, material: RUBBER OVERALL, load_rating: 1125.0 POUNDS MAXIMUM LBS, flange_height: 0.29 INCHES NOMINAL IN, groove_diameter: 1.84 INCHES NOMINAL IN, inside_diameter: 0.77 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-647-7027, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4197021
NSN: 5340-01-647-7027
FSC: 5340 — Hardware, Commercial
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
height1.0 INCHES NOMINAL IN
materialRUBBER OVERALL
load_rating1125.0 POUNDS MAXIMUM LBS
flange_height0.29 INCHES NOMINAL IN
groove_diameter1.84 INCHES NOMINAL IN
inside_diameter0.77 INCHES NOMINAL IN
special_featuresDONUT HEIGHT 0.81, FLANGE HGHT. 0.29
major_outside_diameter3.21 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyISO MOUNT, DONUT, 1125 LB, RBR LBS
NSN5340-01-647-7027
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4197021 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD RATING: 1125.0 POUNDS MAXIMUM LBS
•
GROOVE DIAMETER: 1.84 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.77 INCHES NOMINAL IN
•
HEIGHT: 1.0 INCHES NOMINAL IN
•
FLANGE HEIGHT: 0.29 INCHES NOMINAL IN
•
MATERIAL: RUBBER OVERALL
TECHNICAL CHARACTERISTICS
LOAD RATING1125.0 POUNDS MAXIMUM LBS
GROOVE DIAMETER1.84 INCHES NOMINAL IN
INSIDE DIAMETER0.77 INCHES NOMINAL IN
HEIGHT1.0 INCHES NOMINAL IN
SPECIAL FEATURESDONUT HEIGHT 0.81, FLANGE HGHT. 0.29
FLANGE HEIGHT0.29 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYISO MOUNT, DONUT, 1125 LB, RBR LBS
MATERIALRUBBER OVERALL
MAJOR OUTSIDE DIAMETER3.21 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4197021?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4197021?
4197021 is a MOUNT,RESILIENT,UTILITY.
What is the NSN for 4197021?
4197021 is cataloged in the U.S. Government catalog under NSN 5340-01-647-7027. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4197021