PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4194981
4194981 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 2.80 INCHES NOMINAL IN, overall_height: 3.13 INCHES NOMINAL IN, overall_length: 3.76 INCHES NOMINAL IN, end_item_identification: MRAP - M-ATV, part_name_assigned_by_controlling_agency: BRACKET, STDF 3.13 X 1.50 X 0.18 90. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-666-3311, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4194981
NSN: 5340-01-666-3311
FSC: 5340
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialSTEEL
overall_width2.80 INCHES NOMINAL IN
overall_height3.13 INCHES NOMINAL IN
overall_length3.76 INCHES NOMINAL IN
mounting_hole_quantity2
end_item_identificationMRAP - M-ATV
part_name_assigned_by_controlling_agencyBRACKET, STDF 3.13 X 1.50 X 0.18 90
NSN5340-01-666-3311
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4194981 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT3.13 INCHES NOMINAL IN
OVERALL WIDTH2.80 INCHES NOMINAL IN
OVERALL LENGTH3.76 INCHES NOMINAL IN
MOUNTING HOLE QUANTITY2
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET, STDF 3.13 X 1.50 X 0.18 90
MATERIALSTEEL
END ITEM IDENTIFICATIONMRAP - M-ATV
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
102846Interchangeable
interchangeable cross-reference
interchangeable
D1460Interchangeable
interchangeable cross-reference
interchangeable
102175Interchangeable
interchangeable cross-reference
interchangeable
101363Interchangeable
interchangeable cross-reference
interchangeable
10-2229 ITEM NO 22Interchangeable
interchangeable cross-reference
interchangeable
5VG90770-101Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4194981?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4194981?
4194981 is a BRACKET,MOUNTING.
What parts can replace 4194981?
There are 7 known substitutes for 4194981: 102846, D1460, 102175 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4194981?
4194981 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-666-3311. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4194981

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026