PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4190611-7
4190611-7 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 2.000 INCHES NOMINAL IN, first_hole_diameter: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN, pin_overall_diameter: 0.1870 INCHES NOMINAL IN, second_hole_diameter: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-471-0874, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4190611-7
NSN: 5315-00-471-0874
FSC: 5315
CAGE: 71379 — CESSNA AIRCRAFT COMPANY DBA TEXTRON AVIATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length2.000 INCHES NOMINAL IN
first_hole_diameter0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
pin_overall_diameter0.1870 INCHES NOMINAL IN
second_hole_diameter0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.030 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes1.720 INCHES NOMINAL IN
distance_from_centerline_of_hole_to_end_of_pin0.140 INCHES NOMINAL IN
NSN5315-00-471-0874
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4190611-7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.030 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
PIN OVERALL DIAMETER: 0.1870 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 1.720 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 2.000 INCHES NOMINAL IN
•
SECOND HOLE DIAMETER: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER LENGTH0.030 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
HOLE ARRANGEMENT STYLEBOTH END DRILLED
PIN OVERALL DIAMETER0.1870 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN HOLES1.720 INCHES NOMINAL IN
PIN OVERALL LENGTH2.000 INCHES NOMINAL IN
SECOND HOLE DIAMETER0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.140 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
FFS92Interchangeable
interchangeable cross-reference
interchangeable
101023Interchangeable
interchangeable cross-reference
interchangeable
PEI10760Interchangeable
interchangeable cross-reference
interchangeable
C101023Interchangeable
interchangeable cross-reference
interchangeable
T-1001Interchangeable
interchangeable cross-reference
interchangeable
1010-023Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4190611-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4190611-7?
4190611-7 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 4190611-7?
There are 7 known substitutes for 4190611-7: FFS92, 101023, PEI10760 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4190611-7?
4190611-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-471-0874. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4190611-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026