PartsTable
Technical Data Sheet
Download PDF

41896 — BUSHING,SLEEVE

✓ Government record, cited
Lindy · NUT WASHER
PRODUCT OVERVIEW

41896: BUSHING,SLEEVE.

USB adapters allow users to connect different USB interfaces to a device that uses a differing USB port. The Lindy USB 2.0 Type C to Micro-B Adapter is a compact solution that allows users to connect USB Type Micro-B cables to USB Type C devices such as laptops or tablets. Its compact size and the reversible design of the USB Type C connector make it easy to use.

Data transfer speeds up to 480Mbps are supported for the quick and effortless transfer of large data volumes. This part is cataloged in the U.S. Government catalog under NSN 5310-00-225-6860, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
41896
NSN: 5310-00-225-6860
NIINs: 002256860, 004743314, 012596214
FSC: 5310 — Nuts and Washers
CAGE: 50027 — UNDERSEA SENSOR SYSTEMS INC DIV ULTRA SONOBUOY SYSTEMS (USA)
SPECIFICATIONS
materialCOPPER ALLOY 905 OVERALL
corner_shapeSQUARE OUTSIDE LEFT CORNER
flange_width0.0520 INCHES MINIMUM AND 0.0540 INCHES MAXIMUM IN
overall_length0.8230 INCHES MINIMUM AND 0.8430 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter1.1140 INCHES MINIMUM AND 1.1160 INCHES MAXIMUM IN
body_outside_diameter1.3135 INCHES MINIMUM AND 1.3145 INCHES MAXIMUM IN
flange_outside_diameter1.4900 INCHES MINIMUM AND 1.5100 INCHES MAXIMUM IN
lubricant_accommodation_styleGROOVED OPEN ONE END
material_document_and_classificationAMS 4846 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_groove_location_and_quantity1 EXTERNAL
NSN5310-00-225-6860
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 41896 · Lindy ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT HEIGHT: 0.125 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.125 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH20
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 41896?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41896?
41896 is a BUSHING,SLEEVE manufactured by Lindy.
What is the NSN for 41896?
41896 is cataloged in the U.S. Government catalog under NSN 5310-00-225-6860. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41896