PartsTable
Technical Data Sheet
Download PDF

418914-8 — HANDLE,MANUAL CONTROL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

418914-8: HANDLE,MANUAL CONTROL.

The HANDLE,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include material: ALUMINUM OVERALL, overall_length: 6.350 INCHES MAXIMUM IN, handle_clearance: 1.287 INCHES MINIMUM AND 1.330 INCHES MAXIMUM IN, surface_treatment: PAINT OVERALL, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-239-8148, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
418914-8
NSN: 5340-00-239-8148
FSC: 5340 — Hardware, Commercial
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
materialALUMINUM OVERALL
overall_length6.350 INCHES MAXIMUM IN
handle_clearance1.287 INCHES MINIMUM AND 1.330 INCHES MAXIMUM IN
surface_treatmentPAINT OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
center_to_center_distance_between_mounting_facilities_parallel_to_length4.370 INCHES MINIMUM AND 4.380 INCHES MAXIMUM IN
NSN5340-00-239-8148
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 418914-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.370 INCHES MINIMUM AND 4.380 INCHES MAXIMUM IN
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
HANDLE CLEARANCE: 1.287 INCHES MINIMUM AND 1.330 INCHES MAXIMUM IN
•
COLOR: BLACK
•
SURFACE TREATMENT: PAINT OVERALL
•
MATERIAL: ALUMINUM OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.370 INCHES MINIMUM AND 4.380 INCHES MAXIMUM IN
OVERALL LENGTH6.350 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.190 INCHES IN
HANDLE CLEARANCE1.287 INCHES MINIMUM AND 1.330 INCHES MAXIMUM IN
COLORBLACK
SURFACE TREATMENTPAINT OVERALL
MATERIALALUMINUM OVERALL
THREAD SERIES DESIGNATORUNF
SUBSTITUTES & CROSS-REFERENCES 2
NAS1637Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
61L2+2+1ACReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 418914-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 418914-8?
418914-8 is a HANDLE,MANUAL CONTROL.
What parts can replace 418914-8?
There are 2 known substitutes for 418914-8: NAS1637, 61L2+2+1AC. Substitute compatibility should be verified for your specific system.
What is the NSN for 418914-8?
418914-8 is cataloged in the U.S. Government catalog under NSN 5340-00-239-8148. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 418914-8